Skip to main content
615 Concrete Floors, polished, stained and coated concrete floors in Nashville TN 615-431-3789

Repair & Restoration

Spalling and pitting repair that rebuilds flaking, pitted or eroded floor surfaces with patching mortar and a smooth finish

When the top of a slab flakes or pits, we cut back to sound concrete, patch it and blend it so it holds a finish.

Call or text today615-431-3789

Request concrete floor service

Tell us what is going on. We will contact you to confirm the details and set up a time to look at the job.

Or call 615-431-3789

By sending this you agree that we may contact you about your project. See our Privacy Policy.

Prefer to type? Text your request to 615-431-3789

Spalling and Pitting Repair

Spalling happens when the surface breaks away in flakes or chunks, often from freeze-thaw, deicing salts, poor finishing or chemical exposure. Pitting leaves small holes. Left alone they grow, and coatings will not stay on a crumbling base.

We repair spalled floors across Middle Tennessee, in Nashville garages, loading areas and old shops. We cut out loose material, clean and prime the area, place a bonded patching mortar, trowel it flat and grind it to match before finishing.

What you get

Done right, from the first call

01

Remove the loose material

We cut back to sound concrete.

02

Bonded patches

Primers and patching mortars help new material stick.

03

Feathered edges

Edges are tapered for a smooth blend.

04

Ready for finishing

Patches are ground to match the surrounding slab.

The process

How your service comes together

  1. 1

    Assess

    We sound the surface and mark weak areas.

  2. 2

    Cut and patch

    Weak concrete is removed and patched.

  3. 3

    Level and blend

    Patches are ground flush with the floor.

FAQ

Common questions about spalling & pitting repair

Why does concrete spall?

Common causes are freeze-thaw cycles, salts, over-finishing and chemicals. We look for the cause so it does not repeat.

Can I just coat over pits?

Pits and flakes show through and can fail, so patching first gives a better result.

Will patches show?

With proper blending and a finish like a coating or polish they are hard to notice.

Let us help with your spalling & pitting repair

Call, text or send the form. Tell us about the floor and we will take it from there.

615-431-3789Text